-
Long Fibers PET Nonwoven Geotextile
Long Fibers PET nonwoven geotextile is permeable fabric which has the ability to separate, filter, reinforce, protect, or drain. It is made from 100% polyester(PET) continuous fiber without chemical additives. Its production flow is spinning, lapping and needle punched by our advanced equipment. Because of fiber and processing way differences, the tensile strength, elongation, puncture resistance are much better than staple fiber PET nonwoven geotextile.
-
PP Filament Nonwoven Geotextile
PP filament nonwoven geotextile is spunbonded needle punched geotextile. It is produced by Italy and Germany imported advanced equipment. With the advanced spinning equipment, the filament fineness can reach more than 11 dtex, and strength can reach more than 3.5g/d. Its performance is far higher than our national standard GB/T17639-2008.
-
Concrete Polylock
Concrete PolyLock, also called E-lock or polylock, made of HDPE, E-shaped, is suitable for anchoring in concrete firmly. It is casted or embedded in wet concrete when using, for the exposed welding surface, geomembrane can be welded on it easily. The smooth surface with width 15cm or 10cm is for welding the polyethylene sheets while the 3-4cm height fingers are used to insert the web concrete to get locked-in and fix the joint with geomembrane to make a complete water-proof banking.
-
Geomembrane Installation Concrete Polylock
Geomembrane installation concrete polyLock is a rugged, durable HDPE profile that can be cast-in-place or inserted into wet concrete, leaving the welding surface exposed upon completion of concrete preparation. The embedment of anchor fingers provides a high-strength mechanical anchor to the concrete. When properly installed and utilized with a geomembrane, the polyLock provides an outstanding barrier to leakage. It is the most effective and economical cast-in-place mechanical anchor system for HDPE.
-
Tri-Planar Drainage Geonet
Tri-planar products consist of centralized middle HDPE ribs that provide channelized flow, and diagonally placed top and bottom strands that minimize geotextile intrusion. The void maintaining core structure provides higher transmissivity than bi-planar products.
-
PP Biaxial Geogrid
A geogrid is geosynthetic material used to reinforce soils and similar materials. The principal function of geogrids is for reinforcement. For 30 years biaxial geogrids have been utilized in pavement construction and soil stabilization projects throughout the worldwide. Geogrids are commonly used to reinforce retaining walls, as well as subbases or subsoils below roads or structures. Soils pull apart under tension. Compared to soil, geogrids are strong in tension.
-
High Density Polyethylene Unigeogrid
High density polyethylene unigeogrid is typically designed for soil reinforcement. It is manufactured with high density polyethylene resins from the process of extruding and longitudinal stretching. It has high tensile strength, excellent interlock capacity and low creep deformation.
-
PP Uniaxial Geogrid
Uniaxial plastic geogrid, made of high molecular polymer of polypropylene, is extruded into sheet and then punched into regular mesh pattern and finally stretched in the transverse direction. This production can ensure the structural integrity of the geogrid. The PP material are highly oriented and resists elongation when subjected to heavy loads for long period of time.
-
HDPE Uniaxial Geogrid
Uniaxial geogrids typically have their tensile strength in the machine (roll) direction. They are mainly used to reinforce the soil mass in a steepened slope or segmental retaining wall. On occasion, they function as a wrapping to confine the aggregate in the wire forms of welded wire faced steepened slopes.
-
Staple Fiber PET Nonwoven Geotextile
Staple fiber PET nonwoven geotextile is permeable fabric which has the ability to separate, filter, reinforce, protect, or drain. It is made from 100% polyester(PET) staple fiber without chemical additives and heating. It is needle punched by our advanced equipment, which of the main equipment is imported from Germany. PET material itself has a good UV and chemical resistance properties. It is an environmental friendly construction material.
-
Long Fibers PP Nonwoven Geotextile
Long Fibers PP nonwoven geotextile is spunbonded needle punched geotextile. It is an important high-performance geosynthetics. It is produced by Italy and Germany imported advanced equipment. Its performance is far higher than our national standard GB/T17639-2008.
-
Clay Geosynthetic Barriers
It is bentonite geo-synthetic waterproofing barrier that often replaces thick layers of expensive compacted clay. It is sandwich-made of a non-woven geotextile, a natural sodic bentonite layer and a polypropylene woven sheet.
